Vizio VTAB1008 Charging Port Replacement

Step 1 Vizio VTAB1008 Back Cover Removal



• Carefully slide the heavy duty opening tool between the gap on the side of the device with no buttons.
• Do not insert the opening tool too far into the tablet as this can damage connectors close to edges of the cover.
• The angled tip of the opening tool can be wedged into the device by pressing on the back of the opening tool with the thumb. Move the opening tool in a sliding motion to ensure all tabs separate.
• Corner tabs may require a more forceful prying tool. If needed, carefully insert the metal prying tool into corners to separate the tabs.
Step 2

• Look into the tablet for loose connectors.
• There are three loose connectors: one for the screen, one for the digitizer, and one for the motherboard. They are held in place by the pressure of the backing and screen assemblies.
• Flip the backing from the button-less side over, being careful not to separate the ribbon connector from the display screen.
Step 3 Charging Port
• Remove the motherboard by unscrewing the four securing screws with a J1 Phillip's head screwdriver.
• 3 of the screws are clearly visible while the 4th is hidden by black tape on the upper left corner of the motherboard.
Step 4
• Remove both antenna connectors with a blue opening tool/tweezers.
Step 5
• Remove the ribbon connector at the top of the mother board using the opening tool.
Step 6
• Remove the connector at the top of motherboard by pulling the connector away from the motherboard with fingers or tweezers.
Step 7
• Remove the connector at the side of the motherboard using the opening tool.
• The connector is covered by a piece of black tape.
Step 8
• Remove the red and black wire connector from the motherboard using either fingers or tweezers.
Step 9
• Flip the motherboard over.
• Directly underneath the USB Charging connector will be four solder points that need to be undone in order to remove the charging port.

Author

with 4 other contributors

Gilberto Ambriz

Member since: 09/29/16

546 Reputation

5 Guides authored

Badges: 12

• 
• 
• 

+9 more badges

Team

Eastern Washington University, Team 1-1, Crane Fall 2016 Member of Eastern Washington University, Team 1-1, Crane Fall 2016

EWU-CRANE-F16S1G1

4 Members

12 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview