Introduction

You will need a set of tweezers, a Phillips #00 screwdriver and a Phillips #000 screwdriver to replace your camera's lens.

Remove the 3 mm screws at the sides of the camera using a Phillips #00 screwdriver. Remove the 3 mm screws at the sides of the camera using a Phillips #00 screwdriver. Remove the 3 mm screws at the sides of the camera using a Phillips #00 screwdriver.
  • Remove the 3 mm screws at the sides of the camera using a Phillips #00 screwdriver.

Add Comment

Remove sticker on top of camera as it covers a screw.
  • Remove sticker on top of camera as it covers a screw.

  • There are 5 screws to remove in total on the sides of the camera.

Add Comment

Separate the front piece of the camera from the back, revealing the motherboard. Separate the front piece of the camera from the back, revealing the motherboard.
  • Separate the front piece of the camera from the back, revealing the motherboard.

Add Comment

Remove the two 2.3 mm screws surrounding the lens using the Phillips #000 screwdriver. Remove the two 2.3 mm screws surrounding the lens using the Phillips #000 screwdriver.
  • Remove the two 2.3 mm screws surrounding the lens using the Phillips #000 screwdriver.

Add Comment

Remove the two silver plates using tweezers. Remove the two silver plates using tweezers.
  • Remove the two silver plates using tweezers.

Add Comment

Remove the black lens carefully with your fingers.
  • Remove the black lens carefully with your fingers.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nicole Knoebel

Member since: 03/11/2015

231 Reputation

2 Guides authored

Team

Marist, Team 15-13, Laflen Spring 2015 Member of Marist, Team 15-13, Laflen Spring 2015

MARS-LAFLEN-S15S15G13

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 7

All Time: 227