Introduction
Follow this guide to replace the front cover of a Valve Index VR headset.
Power off and unplug your Index before you begin your repair.
What you need
-
-
Use your hand to pull the front cover straight off of the front of the headset.
-
-
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Valve Index Answers community for help.
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Valve Index Answers community for help.
Cancel: I did not complete this guide.
One other person completed this guide.
2 Comments
Please make one for my rooms light switch also. This is groundbreaking stuff. But seriously is this site moderated at all?
magnets: again, how do they work?
