1. Flip laptop over so that "Service TAG" is at the top left.
    • Flip laptop over so that "Service TAG" is at the top left.

  2. Remove screw at bottom right hand corner.
    • Remove screw at bottom right hand corner.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Remove plate by pushing lightly and sliding to the right.
    • Remove plate by pushing lightly and sliding to the right.

  5. Unscrew 4 screws around hard drive. Unscrew 4 screws around hard drive.
    • Unscrew 4 screws around hard drive.

  6. Remove hard drive by pulling upwards on right side of drive
    • Remove hard drive by pulling upwards on right side of drive

    • When inserting new hard drive note that there is a slot on the left where the hard drive port slides into.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 3

All Time: 112