Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This guide gives instructions on removing the device batteries. The device uses AA batteries. When replacing batteries, be sure that the plus (+) and minus (-) sides of the batteries are inserted as indicated on the device.

  1. Remove the 9.9 mm screw covering the batteries with a PH1 driver head.
    • Remove the 9.9 mm screw covering the batteries with a PH1 driver head.

  2. Use a plastic opening tool to pry the batteries out of their holding.
    • Use a plastic opening tool to pry the batteries out of their holding.

    • If replacing your batteries with new ones, be careful to insert them as indicated on the device.

Johnnie Cairns

Member since: 02/10/2016

495 Reputation

4 Guides authored

Team

USF Tampa, Team 2-6, Sullivan Spring 2016 Member of USF Tampa, Team 2-6, Sullivan Spring 2016

USFT-SULLIVAN-S16S2G6

3 Members

6 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 398