Fix Your Stuff Community Store

VTech Kidizoom Smartwatch DX2 Wristband Replacement

Introduction

If your wristband has visible damage, is worn, torn or broken the following guide will help you repair your problem.

What you need

  1. VTech Kidizoom Smartwatch DX2 Wristband Replacement, Wristband: step 1, image 1 of 1

    • Begin by placing the watch on its side.

    Edit

  2. VTech Kidizoom Smartwatch DX2 Wristband Replacement: step 2, image 1 of 1

    • Next, use the flat end of the spudger to wedge between the small-headed pin (located on the band closest to the watch) to pull the pin up through the other side.

    Edit

  4. VTech Kidizoom Smartwatch DX2 Wristband Replacement: step 3, image 1 of 1

    • Pull the pin out, however not fully, feeling slight resistance is normal.

    Edit

  5. VTech Kidizoom Smartwatch DX2 Wristband Replacement: step 4, image 1 of 1

    • Finally, pull the wristband off. Repeat on the opposite side of the watch if necessary.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Sydney

Member since: 10/25/18

344 Reputation

2 Guides authored

Badges: 8

+5 more badges

Team

UMass Dartmouth, Team S3-G5, Peak Fall 2018 Member of UMass Dartmouth, Team S3-G5, Peak Fall 2018

UMASSD-PEAK-F18S3G5

4 Members

7 Guides authored

One Comment

My Vtech DX2 had a split pin. One side of the pin was the long side and the other very very short. So look out for that. Thanks for this tutorial, was very helpful.

Ryan Laurel - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 36

All Time: 7,224