VNLA Parfait Skates Wheel Replacement

Introduction

Over time, the wheels on roller skates can wear down, affecting your ability to skate smoothly and safely. Whether you're an avid skater or just getting started, learning how to replace your wheels is an important maintenance skill that can extend the life of your skates. This guide will walk you through the process of replacing the wheels on VNLA Parfait roller skates. With the right tools and a few simple steps, you'll have your skates ready to roll in no time.

What you need

Step 1 Wheel

VNLA Parfait Skates Wheel Replacement, Wheel: step 1, image 1 of 2

VNLA Parfait Skates Wheel Replacement, Wheel: step 1, image 2 of 2

Place your skates on a flat surface for stability.
Ensure you have your new wheels and necessary tools within reach.

Edit

Step 2

VNLA Parfait Skates Wheel Replacement: step 2, image 3 of 3

Use the PowerDyne Y3 Skate Tool to loosen the axle nuts on the first wheel by turning counterclockwise.
Keep the nuts in a safe place, as you will reuse them.

Edit

Step 3

Slide the old wheel straight off the axle once the nut is removed.
Repeat the process for all wheels.

Edit

Step 4

VNLA Parfait Skates Wheel Replacement: step 4, image 3 of 3

Place a bearing into the Bones Bearing Press/Puller and align it with the center of the new wheel.
Press down evenly and firmly until the bearing is fully seated.
Flip the wheel and repeat for the second bearing.
Do this for all wheels.