Introduction

This guide will explain how to replace the internal speaker of a UTAB71.

Image 1/2: Make sure to be gentle with the pry tool and work your way around the edges of the tablet slowly. Image 2/2: Make sure the tablet is powered off before prying open.
  • Use a plastic pry tool to undo the clips that attach the two halves of the tablet.

  • Make sure to be gentle with the pry tool and work your way around the edges of the tablet slowly.

  • Make sure the tablet is powered off before prying open.

  • There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.

Add Comment

Image 1/1: If you have no experience in soldering, please follow this [guide|750| guide]
  • Use a soldering tool to disconnect the speaker wires off the motherboard.

  • If you have no experience in soldering, please follow this guide

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryan Jewell

Member since: 10/20/2016

401 Reputation

4 Guides authored

Team

UMass Dartmouth, Team 5-4, Martin Fall 2016 Member of UMass Dartmouth, Team 5-4, Martin Fall 2016

UMASSD-MARTIN-F16S5G4

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 53