Fix Your Stuff Community Store

Udi Discovery U818A FPV Controller Battery Replacement

Introduction

This guide will show you how to replace the battery of your Udi U818A FPV drone controller. You will need a JIS #0 screwdriver to complete this task.

What you need

  1. Udi Discovery U818A FPV Controller Battery Replacement, Controller Battery: step 1, image 1 of 1

    • Turn the remote control over so that the buttons and joysticks are facing downward.

    Edit

  3. Udi Discovery U818A FPV Controller Battery Replacement: step 2, image 1 of 1

    • Using a JIS #0, unscrew the silver 4mm screw that holds the battery cover in place.

    Edit

  4. Udi Discovery U818A FPV Controller Battery Replacement: step 3, image 1 of 1

    • Open the battery access panel.

    • Disconnect the red and black wires.

    • Remove the depleted battery.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 251