Introduction

The guide will assist users with replacing damaged ear cushions. It will show users how to replace a torn or worn out ear cushion with a new one.

Tools

No tools required.

Parts

Firmly pinch ear cushion between thumb and forefinger.
  • Firmly pinch ear cushion between thumb and forefinger.

  • Using the hand not holding the ear cushion, grasp the orange plate that is below the ear cushion.

  • If the black rubber lining on the orange plate is grasped, then the rubber lining on the ear piece may tear.

Add Comment

Deck the Halls
With tools and Fix Kits
Rotate ear cushion counter-clockwise about half an inch. The ear cushion should audibly snap out of place.
  • Rotate ear cushion counter-clockwise about half an inch.

  • The ear cushion should audibly snap out of place.

  • After it has audibly snapped out of place, lift the ear cushion off of the device.

  • During reassembly, rotate the ear cushion clockwise.

Add Comment

Using the new cushion, align the pegs located on both the orange plate and ear cushion. Make sure that both the ear cushion and the orange plate have the same designation.
  • Using the new cushion, align the pegs located on both the orange plate and ear cushion.

  • Make sure that both the ear cushion and the orange plate have the same designation.

  • Once the pegs are aligned, push the new ear cushion in place.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Alexis Uribe

Member since: 03/24/2017

443 Reputation

4 Guides authored

Team

Baylor, Team S5-G1, Williams Spring 2017 Member of Baylor, Team S5-G1, Williams Spring 2017

BU-WILLIAMS-S17S5G1

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 31

All Time: 203