Trio Stealth G4 Back Panel Replacement

Introduction

The back panel assembly is an important part of the device as it protects all of the internal components of the tablet.

The disassembly is very simple and requires only a plastic opening tool. The latches keeping the back panel attached to the front casing can sometimes be a little difficult to separate, so don't be afraid to use some force.

What you need

Step 1 Back Panel

Trio Stealth G4 Back Panel Replacement, Back Panel: step 1, image 1 of 1

Working on your device while it is turned on may result in electric shock. Be sure to shut down and unplug your device before you begin.
Flip your tablet over so that the back panel is facing up.

Edit

Step 2

Use a plastic opening tool to gently pry the back panel assembly apart from the front casing.
Start on one edge of the device by inserting the plastic opening tool between the back panel and the front casing using a gentle rocking motion.

Edit

Step 3

Once you have successfully separated one edge of the back panel from the front casing, slide the plastic opening tool along the other edges to detach them as well.
The latches keeping the back panel attached to the front casing can sometimes be a little difficult to separate, so don't be afraid to use some force.

Edit