Introduction

This guide will show you how to remove the back cover of this device. It may be difficult so take your time.

  1. Turn the laptop off, unplug the AC adapter, and any other auxiliary components.
    • Turn the laptop off, unplug the AC adapter, and any other auxiliary components.

    • Turn over the laptop and proceed to take out the seven 5mm silver JIS #1 head screws. If some of the screws are difficult to take out use the tweezers to help.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Use the screwdriver to take out the three 5mm black JIS #1 head screws that are located on the hinge.
    • Use the screwdriver to take out the three 5mm black JIS #1 head screws that are located on the hinge.

  4. Use the spudger to pry under the back cover until it pops off. Use the spudger to pry under the back cover until it pops off.
    • Use the spudger to pry under the back cover until it pops off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sarah Fordjour

Member since: 09/25/2017

426 Reputation

4 Guides authored

Team

USF Tampa, Team S3-G2, Cannon Fall 2017 Member of USF Tampa, Team S3-G2, Cannon Fall 2017

USFT-CANNON-F17S3G2

4 Members

7 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 12

All Time: 300