Skip to main content

Toshiba Satellite L670 HDD replacement

What you need

  1. Toshiba Satellite L670 HDD replacement, Turn off the computer: step 1, image 1 of 1
    • Turn off the computer and unplug the power from the computer.

  2. Toshiba Satellite L670 HDD replacement, Flip Laptop: step 2, image 1 of 1
    • Turn the laptop upside down. Locate the two latches on either side of the battery.

    • Now the battery comes off.

  3. Toshiba Satellite L670 HDD replacement, Remove battery: step 3, image 1 of 2 Toshiba Satellite L670 HDD replacement, Remove battery: step 3, image 2 of 2
    • Remove the battery

  4. Toshiba Satellite L670 HDD replacement, Remove rear panel: step 4, image 1 of 2 Toshiba Satellite L670 HDD replacement, Remove rear panel: step 4, image 2 of 2
    • Remove the back plate

  5. Toshiba Satellite L670 HDD replacement, Remove the HDD: step 5, image 1 of 2 Toshiba Satellite L670 HDD replacement, Remove the HDD: step 5, image 2 of 2
    • Pull the HDD to the left using the silver tab.

    • Pull up on the silver tab and remove the hard drive from the slot.

  6. Toshiba Satellite L670 HDD replacement, Unscrew the HDD cover: step 6, image 1 of 2 Toshiba Satellite L670 HDD replacement, Unscrew the HDD cover: step 6, image 2 of 2
    • Remove the 4 screws from the hard drive.

  7. Toshiba Satellite L670 HDD replacement, Insert your new SSD in the case: step 7, image 1 of 3 Toshiba Satellite L670 HDD replacement, Insert your new SSD in the case: step 7, image 2 of 3 Toshiba Satellite L670 HDD replacement, Insert your new SSD in the case: step 7, image 3 of 3
    • Take your new SSD hard drive.

    • Place the SSD in the silver case.

    • Place back the 4 screws you just removed.

  8. Toshiba Satellite L670 HDD replacement, Insert SSD: step 8, image 1 of 2 Toshiba Satellite L670 HDD replacement, Insert SSD: step 8, image 2 of 2
    • Insert the SSD into the laptop.

    • Slide the SSD to the right into the socket.

  9. Toshiba Satellite L670 HDD replacement, Place back panel + battery: step 9, image 1 of 1
    • Replace the back panel and screw it in place.

    • Put the battery back in, you will hear a click once it falls into place.

Conclusion

To reassemble the device, follow these instructions in reverse order.

Special thanks to these translators:

nl en

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

levi lenaers

Member since: 09/24/16

169 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 13

Past 30 Days: 39

All Time: 1,101