Parts

No parts required.

Image 1/1:
  • Locate the two sliding battery locks on the underside of the laptop.

Add Comment

Image 1/2: Image 2/2:
  • Locate the right battery lock and slide it to the right.

Add Comment

Image 1/2: Image 2/2:
  • While holding the left battery lock to the left, lift up the battery using the tab located on the top center of the battery.

Add Comment

Image 1/1:
  • Remove the battery from the laptop.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Unscrew the RAM cover and rotate the cover up to remove it. The screw should not be fully removed from the cover itself.

Add Comment

Image 1/2: Image 2/2:
  • Push the small levers at the sides of the RAM module away from each other. The RAM module should automatically rotate upwards.

Add Comment

Image 1/2: Image 2/2:
  • Remove the RAM module by pulling it out at the angle it was rotated to.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • If you want to replace the second RAM module, apply steps 2 and 3 to do so.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order. When placing the RAM chips in, push them down until the levers snap into place after inserting them into the slot.

Ricky Baker

Member since: 03/26/2014

217 Reputation

2 Guides authored

Team

Clemson, Team 1-2, Benson Spring 2014 Member of Clemson, Team 1-2, Benson Spring 2014

CLEM-BENSON-S14S1G2

3 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 13

All Time: 255