Introduction

How to apply thermal compound, paste, grease on the main CPU.


Parts

No parts required.

Video Overview

Image 1/2: If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off Image 2/2: Use again cloth with isopropyl alcohol to clean the Thermal surface.
  • Use a lint-free cloth to clean the old thermal compound.

  • If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off

  • Use again cloth with isopropyl alcohol to clean the Thermal surface.

Add Comment

Image 1/3: Be carefully,if you don't want to break the CPU. Image 2/3: Be carefully,if you don't want to break the CPU. Image 3/3: Be carefully,if you don't want to break the CPU.
  • Use the same technic to clean the surface of the processor from the old thermal compound.

  • Be carefully,if you don't want to break the CPU.

Add Comment

Image 1/3: Using a plastic finger protector, glove or a plastic bag on your finger and spread the paste evenly across the surface. Image 2/3: Another way to spread the compound is by using a plastic card. Image 3/3: Another way to spread the compound is by using a plastic card.
  • Dispense a small amount of thermal compound.

  • Using a plastic finger protector, glove or a plastic bag on your finger and spread the paste evenly across the surface.

  • Another way to spread the compound is by using a plastic card.

Add Comment

Image 1/2: . Image 2/2: .
  • That's all.

  • .

  • .

  • .

  • .

  • Did you do it successfully?

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

ZFix

Member since: 12/09/2013

129,079 Reputation

366 Guides authored

Team

Master Techs Member of Master Techs

Community

264 Members

613 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 49

All Time: 1,527