Introduction

Remove the RAM module with this guide. Reverse the steps to install a new one to allow for more laptop storage.

Parts

No parts required.

Image 1/3: Image 2/3: Image 3/3:
  • Close the laptop, and flip it upside down. You want the spine to be furthest away from you.

Add Comment

Image 1/1:
  • Release the locking mechanism by switching the left slider to the left.

Add Comment

Image 1/2: Image 2/2:
  • Slide the right slider to the right, and simultaneously, pull the battery out at a diagonal angle.

Add Comment

Image 1/2: Image 2/2:
  • With the Phillips #0 screwdriver, unscrew the 4.6mm screw on the left side of the "L"-shaped covering.

Add Comment

Image 1/2: Image 2/2:
  • Lift up the "L"-shaped plastic covering to remove it.

Be patient, lift both sides, and don't use a screwdriver to open it or you will break the nobs.

Royer Adames - Reply

Image 1/3: Lift up the RAM module to remove. Image 2/3: Lift up the RAM module to remove. Image 3/3: Lift up the RAM module to remove.
  • Push the two metal prongs on either side of the RAM module away from the module simultaneously.

  • Lift up the RAM module to remove.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Ashley Cannon

Member since: 03/24/2015

144 Reputation

1 Guide authored

Team

Baylor, Team 6-5, Shaver Spring 2015 Member of Baylor, Team 6-5, Shaver Spring 2015

BU-SHAVER-S15S6G5

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 9

All Time: 718