Remove the 5.75 mm screw from the cover panel. Turn the laptop over with the screen facing down.
  • Remove the 5.75 mm screw from the cover panel.

  • Turn the laptop over with the screen facing down.

Add Comment

Lift up the cover panel using a plastic opening tool.
  • Lift up the cover panel using a plastic opening tool.

Add Comment

Match the notch on the left of the gold edge of the memory with the notch of the laptop.
  • Match the notch on the left of the gold edge of the memory with the notch of the laptop.

  • Insert the memory into the slot.

Add Comment

Push down on the memory gently until it clicks into place.
  • Push down on the memory gently until it clicks into place.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Garrett Gudgel

Member since: 10/05/2010

705 Reputation

13 Guides authored

Team

Cal Poly, Team 4-43, Amido Fall 2010 Member of Cal Poly, Team 4-43, Amido Fall 2010

CPSU-AMIDO-F10S4G43

5 Members

13 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 5

All Time: 4,453