To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws. Gently lift the panel off.
  • To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws.

  • Gently lift the panel off.

Add Comment

With the panel removed, slide the hard drive towards the top of the netbook with moderate force. This will free the hard drive from its original location.
  • With the panel removed, slide the hard drive towards the top of the netbook with moderate force.

  • This will free the hard drive from its original location.

Add Comment

Obtain a new hard drive. Apply firm pressure to secure the new hard drive into the old hard drive's location.
  • Obtain a new hard drive.

  • Apply firm pressure to secure the new hard drive into the old hard drive's location.

Add Comment

Place the back panel in its original position. Using the bit driver and Phillips #0 bit, secure the hard drive panel to the netbook body.
  • Place the back panel in its original position.

  • Using the bit driver and Phillips #0 bit, secure the hard drive panel to the netbook body.

Add Comment

Finish Line

One other person completed this guide.

Mason McCaskill

Member since: 10/18/2013

943 Reputation

9 Guides authored

Team

Clemson, Team 14-2, Benson Fall 2013 Member of Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 12

Past 30 Days: 38

All Time: 1,354