Skip to main content

Introduction

Check to see if anything is obstructing the wheel before referring to this guide.

Parts

No parts specified.

  1. From the top view, remove each of the four pins that hold the casing in place. From the top view, remove each of the four pins that hold the casing in place.
    • From the top view, remove each of the four pins that hold the casing in place.

  2. Slowly pull the casing up to remove it.
    • Slowly pull the casing up to remove it.

  3. Using a Phillips 1 screwdriver, completely unscrew the 8mm screw located in the center of the wheel. Repeat this step for other wheels if needed.
    • Using a Phillips 1 screwdriver, completely unscrew the 8mm screw located in the center of the wheel. Repeat this step for other wheels if needed.

  4. Carefully pull the wheel off of its axle.  Repeat for other wheels as necessary.
    • Carefully pull the wheel off of its axle. Repeat for other wheels as necessary.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Erik Rudberg

Member since: 02/02/2015

140 Reputation

1 Guide authored

Team

Cal Poly, Team 6-30, Amido Winter 2015 Member of Cal Poly, Team 6-30, Amido Winter 2015

CPSU-AMIDO-W15S6G30

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 95