Parts

No parts required.

Peel back the sticker on the bottom of the device to reveal the two screws
  • Peel back the sticker on the bottom of the device to reveal the two screws

Add Comment

Unscrew the two t-5 screws
  • Unscrew the two t-5 screws

Add Comment

Shove the flat head screw driver into the edge of the device.  Pry the faceplate
  • Shove the flat head screw driver into the edge of the device. Pry the faceplate

Add Comment

Release the yellow ribbon cable
  • Release the yellow ribbon cable

Add Comment

Identify green motherboard.  Unscrew the three screws holding the board in place
  • Identify green motherboard. Unscrew the three screws holding the board in place

Add Comment

Remove the motherboard from the back plate
  • Remove the motherboard from the back plate

Add Comment

unplug the battery from the board
  • unplug the battery from the board

Add Comment

Plug the new battery into the white receptacle on the green board
  • Plug the new battery into the white receptacle on the green board

Add Comment

Put the green motherboard back into the back plate and secure with the 3 screws
  • Put the green motherboard back into the back plate and secure with the 3 screws

Add Comment

Reconnect the yellow ribbon cable and snap that mutha back together!
  • Reconnect the yellow ribbon cable and snap that mutha back together!

Add Comment

Insert t-5 screws and tighten
  • Insert t-5 screws and tighten

Add Comment

Replace the label to hide screws
  • Replace the label to hide screws

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Mike Sollars

Member since: 07/11/2013

471 Reputation

3 Guides authored

Team

WRI115, Team 1-1, Ruszkiewicz Spring 2013 Member of WRI115, Team 1-1, Ruszkiewicz Spring 2013

WRI115-RUSZKIEWICZ-S13S1G1

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 7

Past 30 Days: 47

All Time: 2,664