Introduction

This guide will teach you how to properly disassemble a Toastmaster toaster over and replace the toasting knob. Before you begin, clean out your toaster oven and make sure it is off and unplugged.

Parts

No parts required.

Remove the two 4mm by 8mm screws from the back of the toaster oven.
  • Remove the two 4mm by 8mm screws from the back of the toaster oven.

Add Comment

Remove the four 4mm by 8mm screws from the black supports from the base of the toaster oven.
  • Remove the four 4mm by 8mm screws from the black supports from the base of the toaster oven.

  • Take the two supports off of the bottom.

Add Comment

  • Remove the two 4mm by 4mm screws from the base in order to remove the tray.

Add Comment

  • Slide the back panel off of the oven.

Add Comment

  • Grip the sides of the metal cover and lift the cover up off the toaster oven top.

Add Comment

  • The knob is missing in the first picture.

  • Push the knob into the hole.

  • The knob is now back in place in the last picture.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alissa Mell

Member since: 09/26/2017

101 Reputation

1 Guide authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 10

All Time: 96