Introduction

This guide will show how to remove the fan.

Parts

No parts required.

Unscrew the five 0.31 inch T-9 screws on the back cover.
  • Unscrew the five 0.31 inch T-9 screws on the back cover.

Add Comment

Slide the cover towards the back until it is no longer under the front cover.
  • Slide the cover towards the back until it is no longer under the front cover.

Add Comment

Lift the cover up and off the device.
  • Lift the cover up and off the device.

Add Comment

Remove power cable to fan from motherboard.
  • Remove power cable to fan from motherboard.

Add Comment

Remove the four 0.31 inch T-9 screws and gently pull fan out. Remove the four 0.31 inch T-9 screws and gently pull fan out.
  • Remove the four 0.31 inch T-9 screws and gently pull fan out.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Talha

Member since: 10/11/2011

31 Reputation

2 Guides authored

Team

Cal Poly, Team 5-33, Amido Fall 2011 Member of Cal Poly, Team 5-33, Amido Fall 2011

CPSU-AMIDO-F11S5G33

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 540