Thrustmaster T Flight Hotas 4 J1 Screws on Joystick Handle Replacement

You're viewing a previously published version of this guide. View latest version

Jan 08, 2018 - 04:01:36

Jan 08, 2018 - 04:01:36 Jan 08, 2018 - 04:01:31 Jan 08, 2018 - 04:00:56 Jan 08, 2018 - 04:00:55 Nov 08, 2017 - 11:57:00 Nov 08, 2017 - 11:48:03 Nov 07, 2017 - 05:42:19 Nov 07, 2017 - 05:12:09 Nov 07, 2017 - 04:52:42 Nov 07, 2017 - 04:50:07 Nov 07, 2017 - 04:48:34 Nov 07, 2017 - 04:45:11 Nov 07, 2017 - 04:40:42 Nov 07, 2017 - 04:09:16 Nov 07, 2017 - 04:08:08 Nov 07, 2017 - 04:01:58 Nov 07, 2017 - 03:58:26

Newer

Introduction

The goal of this guide is to show how to remove the J1 screws from the joystick exterior.

What you need

Step 1 J1 Screws on Joystick Handle

Thrustmaster T Flight Hotas 4 J1 Screws on Joystick Handle Replacement, J1 Screws on Joystick Handle: step 1, image 1 of 2

Thrustmaster T Flight Hotas 4 J1 Screws on Joystick Handle Replacement, J1 Screws on Joystick Handle: step 1, image 2 of 2

Be sure to disconnect the controller from the power source before disassembling.
Remove the four 15 mm J1 JIS head screws from the exterior of the joystick.