Introduction

You must first remove all 9 screws in order to remove the bottom panel of the joystick.

Parts

No parts required.

Be sure to disconnect the controller from the power source before disassembling.
  • Be sure to disconnect the controller from the power source before disassembling.

  • Turn the controller upside down.

  • Remove the 20 mm J1 JIS head screw.

  • Remove the six 12 mm J1 JIS head screws.

  • Remove the two 6 mm J1 JIS head screws.

Add Comment

Insert opening tool or finger into the divet located beneath the USB port.
  • Insert opening tool or finger into the divet located beneath the USB port.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Crystal Nguyen

Member since: 09/11/2017

431 Reputation

4 Guides authored

Team

CSU Fullerton, Team S2-G1, Bruce Fall 2017 Member of CSU Fullerton, Team S2-G1, Bruce Fall 2017

CSUF-BRUCE-F17S2G1

3 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 17

All Time: 108