Fix Your Stuff Community Store

Logitech G910 Lights Replacement

Introduction

Use this guide to replace the lights of your Logitech G910.

What you need

  1. Logitech G910 Lights Replacement, Lights: step 1, image 1 of 1

    • Unplug the keyboard from the computer.

    Edit

  2. Logitech G910 Lights Replacement: step 2, image 1 of 1

    • Flip the keyboard and unscrew the 15 back screws. The screws in the palm rest must be unscrewed and the palm rest removed to access the 6 screws at the bottom of the keyboard. (There are 2 lengths of screws the shorter ones are for the palm rest) There are also 2 screws under the nonslip pads of the palm rest.

    Edit

  4. Logitech G910 Lights Replacement: step 3, image 1 of 1

    • Release the front part using a spudger or flat screwdriver to gently pry. Lift off carefully.

    Edit

  5. Logitech G910 Lights Replacement, Lift the film: step 4, image 1 of 2 Logitech G910 Lights Replacement, Lift the film: step 4, image 2 of 2

    • Gently lift up the plastic film in the top right corner.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

3 Comments

So what do I do after I take apart my keyboard?

CuddlyZebesian - Reply

this guide is currently missing some steps. If you have figured it out, pls edit this guide.

tayola -

Desolder and replace LEDs the size of a grain of sand xD
This is definitely not a job I'd mark as "easy".

squallloire -

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 15

Past 30 Days: 69

All Time: 5,996