Fix Your Stuff Community Store

The Internal Components of an Atari Lynx

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

This guide will show you how to disassemble your Atari Lynx before diving into any problems.

What you need

  1. The Internal Components of an Atari Lynx, Atari Lynx: step 1, image 1 of 1

    • Before disassembling your Atari Lynx, be sure the device is powered off.

    • Remove any game in the console by opening the right latch and sliding the game to the right.

    Edit

  2. The Internal Components of an Atari Lynx: step 2, image 1 of 1

    • Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.

    • Pinch the rear panel with your fingers and lift away from the Atari.

    Edit

  4. The Internal Components of an Atari Lynx: step 3, image 1 of 1

    • Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear any wires attached to battery panel.

    Edit

  5. The Internal Components of an Atari Lynx: step 4, image 1 of 1

    • Remove the control panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear the speaker wire while removing the control panel.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 6 other contributors

John Lopez

Member since: 01/27/14

443 Reputation

4 Guides authored

Badges: 9

+6 more badges

Team

Cal Poly, Team 1-42, Maness Winter 2014 Member of Cal Poly, Team 1-42, Maness Winter 2014

CPSU-MANESS-W14S1G42

5 Members

16 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 93