Fix Your Stuff Community Store

Teenage Engineering OP-1 Connector Board Disconnection

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Use this guide to disconnect the Connector Board of the OP-1.

What you need

  1. Teenage Engineering OP-1 Connector Board Disconnection, Remove Back Panel: step 1, image 1 of 3 Teenage Engineering OP-1 Connector Board Disconnection, Remove Back Panel: step 1, image 2 of 3 Teenage Engineering OP-1 Connector Board Disconnection, Remove Back Panel: step 1, image 3 of 3

    • Open the back panel by using a Jimmy on the side of the panel. Be careful not to damage the OP-1 coating.

    • Lift the back panel and remove it. The Connector Board is revealed.

    • Disconnect the flex connector by lifting it up with a spudger.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

teenage engineering

Member since: 10/23/13

1,077 Reputation

2 Guides authored

Badges: 11

+8 more badges

Team

Teenage Engineering Member of Teenage Engineering

Community

3 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 40