Parts

No parts required.

Image 1/3: Turn the speaker to the back and open the stand. Image 2/3: Located at the base of the stand are three 3-mm Torx screws. Image 3/3: Located at the base of the stand are three 3-mm Torx screws.
  • Obtain the T5-bit from the toolkit and assemble the screwdriver.

  • Turn the speaker to the back and open the stand.

  • Located at the base of the stand are three 3-mm Torx screws.

Add Comment

Image 1/2: Gently pull the stand out after removing all the screws. Image 2/2: Gently pull the stand out after removing all the screws.
  • Remove the three 3-mm Torx screws with the T5-bit screwdriver.

  • Gently pull the stand out after removing all the screws.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

Elise Howard

Member since: 10/13/2015

639 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 6

All Time: 142