Tools

No tools required.

Parts

No parts required.

Introduction

This guide is useful if the SD card in the device is not working or properly installed.

Image 1/3: While holding the phone with one hand, place the thumb of the other hand at the top of the battery cover. Image 2/3: Slide the battery cover toward the bottom of the phone to remove. Image 3/3: Slide the battery cover toward the bottom of the phone to remove.
  • To remove the battery cover, first turn the phone so that the keypad is face down.

  • While holding the phone with one hand, place the thumb of the other hand at the top of the battery cover.

  • Slide the battery cover toward the bottom of the phone to remove.

Add Comment

Image 1/2: Pull the battery upward, while securing the phone with your other hand. Image 2/2: Gently remove the battery and place it to the side of the phone.
  • To remove the battery, first grab it using a finger on either side.

  • Pull the battery upward, while securing the phone with your other hand.

  • Gently remove the battery and place it to the side of the phone.

Add Comment

Image 1/1:
  • Locate the slot for the SD card on the back of the phone. Insert the SD card so that the copper connectors on the card line up with the connectors on the phone (no card pictured).

Add Comment

Image 1/1:
  • Secure the SD card in place by sliding the silver tab over it (SD card not pictured).

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Colin Horgan

Member since: 10/22/2012

22 Reputation

2 Guides authored

Team

Clemson, Team 15-4, Benson Fall 2012 Member of Clemson, Team 15-4, Benson Fall 2012

CLEM-BENSON-F12S15G4

4 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 198