Introduction

This guide will provide steps on how to remove and replace a CD drive in this DVD player. It is important to have all tools ready and have completed prerequisite guides.

This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete steps that deal with delicate internal components.

This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step. Wedge head lightly between drive and bottom of tab. Repeat on both sides.
  • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

  • Wedge head lightly between drive and bottom of tab.

  • Repeat on both sides.

  • Gently pull out ribbon

Add Comment

Drive Removal
  • Drive Removal

  • Use Philip's screw driver to remove three 7 mm screws.

  • Rotate counter clockwise to loosen screws.

Add Comment

This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.
  • This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete this step.

  • Follow the red and black cables to the motherboard point of attachment.

  • Use a Flat head screwdriver.

  • Place head of driver into the grove of plug and port.

  • Wedge on all sides evenly to work out plug slowly.

  • Remove small and large plugs.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sarah Henry

Member since: 10/31/2016

417 Reputation

4 Guides authored

Team

Baylor, Team 5-10, Williams Fall 2016 Member of Baylor, Team 5-10, Williams Fall 2016

BU-WILLIAMS-F16S5G10

2 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 11

All Time: 165