Skip to main content

Starbucks Barista Steam Wand replacement or cleaning

What you need

  1. Starbucks Barista Steam Wand replacement or cleaning, steam wand: step 1, image 1 of 1
    • Using a wrench, unscrew the hex nut and remove the steam wand.

    • Note: Do not lose the hex nut once it is unscrewed.

  2. Starbucks Barista Steam Wand replacement or cleaning: step 2, image 1 of 2 Starbucks Barista Steam Wand replacement or cleaning: step 2, image 2 of 2
    • Using a thin tool or item, such as a paper clip, poke around through the holes on both ends of the wand to remove any foreign material.

    • Place the steam wand in a de-calcifying solution as directed by product.

    • Reconnect the steam wand.

    • See the links section of the device page to purchase a new steam wand.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

David

Member since: 01/28/11

739 Reputation

3 Guides authored

Team

Cal Poly, Team 4-42, Regan Winter 2011 Member of Cal Poly, Team 4-42, Regan Winter 2011

CPSU-REGAN-W11S4G42

4 Members

5 Guides authored

One Comment

To replace steam-wand seals (in case of water leaking out from the center of the steam-wand): https://www.youtube.com/watch?v=fulyy9A9... , but note - for parts: https://philips.encompass.com/model/SAER... (worth going to amazon.de and entering the partnumbers into the search box: e.g. the o-rings for the needle-valve (996530013462)

R Cly - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 8

Past 30 Days: 37

All Time: 15,840