Spy Net Ultra Vision Goggles Lens Replacement

You're viewing a previously published version of this guide. View latest version

Jan 09, 2015 - 04:52:58

Jan 09, 2015 - 04:52:58 Jan 09, 2015 - 04:52:54 Nov 14, 2014 - 12:22:20 Nov 12, 2014 - 10:03:00 Nov 12, 2014 - 08:59:49 Nov 10, 2014 - 10:13:16 Nov 10, 2014 - 10:12:10 Nov 10, 2014 - 10:11:56 Nov 10, 2014 - 10:11:29 Nov 10, 2014 - 10:09:47 Nov 10, 2014 - 10:09:20 Nov 10, 2014 - 10:05:37 Nov 10, 2014 - 10:03:35 Nov 10, 2014 - 10:03:22 Nov 10, 2014 - 09:25:06 Nov 10, 2014 - 09:24:08 Nov 10, 2014 - 09:23:54 Nov 10, 2014 - 09:20:36 Nov 10, 2014 - 09:20:36 Nov 10, 2014 - 09:02:17 Nov 10, 2014 - 08:54:19 Nov 10, 2014 - 08:38:49 Nov 10, 2014 - 08:38:13 Nov 10, 2014 - 08:37:27 Nov 10, 2014 - 08:37:19 Nov 10, 2014 - 08:37:18 Nov 10, 2014 - 08:36:55 Nov 03, 2014 - 09:54:12 Nov 03, 2014 - 09:52:53 Nov 03, 2014 - 09:52:08 Nov 03, 2014 - 09:47:15 Nov 03, 2014 - 09:42:04 Nov 03, 2014 - 09:40:48 Nov 03, 2014 - 09:39:52 Oct 22, 2014 - 09:06:45 Oct 22, 2014 - 08:58:46 Oct 22, 2014 - 08:55:04 Oct 22, 2014 - 08:54:21 Oct 22, 2014 - 08:54:05 Oct 22, 2014 - 08:53:27 Oct 22, 2014 - 08:53:27 Oct 22, 2014 - 08:50:21 Oct 22, 2014 - 08:49:09 Oct 22, 2014 - 08:49:09 Oct 22, 2014 - 08:38:01

Newer

Introduction

If when looking through the the goggles the image is blurred or distorted there is a chance this is due to a smudged or damaged lens. This guide will illustrate how to remove the lens to clean or replace it. For more information on smudged or damaged lens refer to the troubleshooting page. Link:Spy Net Ultra Vision Goggles Troubleshooting

What you need

Step 1 Opening the Device

Spy Net Ultra Vision Goggles Lens Replacement, Opening the Device: step 1, image 1 of 2

Spy Net Ultra Vision Goggles Lens Replacement, Opening the Device: step 1, image 2 of 2

Remove the six silver 11.4 mm Phillips #0 screws and pry open the device, using the plastic opening tools if necessary. To do this, locate the groves running along the side of the entire device and wedge it open.