Parts

No parts required.

  1. Remove the battery cover by removing the P1 Philips screw.
    • Remove the battery cover by removing the P1 Philips screw.

    • Remove the 3 AA batteries by hand.

  2. Unscrew Top Cover with a 3mm Triangle driver bit from the Driver Kit.
    • Unscrew Top Cover with a 3mm Triangle driver bit from the Driver Kit.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Use Opening Tool to release barbed latch on top cover.
    • Use Opening Tool to release barbed latch on top cover.

  5. Release pilot studs near the hinge with Metal Spudger.
    • Release pilot studs near the hinge with Metal Spudger.

  6. Once the Top Cover is free, you will have full access to the circuitry.
    • Once the Top Cover is free, you will have full access to the circuitry.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Adam Kinnett

Member since: 02/15/2016

121 Reputation

1 Guide authored

Team

IUPUI, Team 7-7, Wilson Spring 2016 Member of IUPUI, Team 7-7, Wilson Spring 2016

IUPUI-WILSON-S16S7G7

5 Members

2 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 73