Introduction

Follow the guide to replace the glass or other parts of the device once it's open

  1. With a thin opening tool remove the back cover prying between screen and cover on all the device edges.
    • With a thin opening tool remove the back cover prying between screen and cover on all the device edges.

  2. Be careful not to damage the speaker screwed to the back cover with two screws.
    • Be careful not to damage the speaker screwed to the back cover with two screws.

    • Unscrew the screws and remove the speaker from the back cover.

    • With the help of a hairdryer or any heat source, heat the corners of the glass and with a thin tool remove the adhesive and subsequently the glass

    • Lift up the protective film of the touchscreen connector.

    • Push the two black clips to disconnect the ribbon cable connector.

    • Replace the old touchscreen with a new one

Conclusion

To reassemble the device, follow these instructions in reverse order.

3 other people completed this guide.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Smilzo

Member since: 11/09/2013

5,459 Reputation

28 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 17

All Time: 242