Skip to main content

Introduction

This is replace guide for Sony Xperia Z3 signal flex, also known as an antenna.

  1. Heat to soften back cover sticker. Use suction cup to open a gap and insert into the guitar pick. Use suction cup to open a gap and insert into the guitar pick.
    • Heat to soften back cover sticker.

    • Use suction cup to open a gap and insert into the guitar pick.

  2. Slide the guitar pick to cut the sticker and remove back cover. Slide the guitar pick to cut the sticker and remove back cover.
    • Slide the guitar pick to cut the sticker and remove back cover.

  3. Remove the signal flex finally. But it's hold tightly, please handle it carefully. Remove the signal flex finally. But it's hold tightly, please handle it carefully.
    • Remove the signal flex finally. But it's hold tightly, please handle it carefully.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

Sophia

Member since: 03/25/2014

43,398 Reputation

62 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 4,671