Skip to main content

Fix Your Stuff

Right to Repair

Store

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

Remove the main flex cable from the Sony Xperia Z3 Compact motherboard. This includes the button cable.

  1. First, heat up. And then place the suction cup and pull to open a gap. Insert into the guitar pick to cut the adhesive sticker under the back cover. Finally, remove the back cover.
    • First, heat up.

    • And then place the suction cup and pull to open a gap. Insert into the guitar pick to cut the adhesive sticker under the back cover.

    • Finally, remove the back cover.

  2. Disconnect the NFC antenna. Unscrew the screws holding the black midframe in place. Remove back frame.
    • Disconnect the NFC antenna.

    • Unscrew the screws holding the black midframe in place.

    • Remove back frame.

  3. Disconnect the battery flex cable.
    • Disconnect the battery flex cable.

  4. Remove rear camera bracket. Release connector, but take care not to damage the electronic components next to the connector. It is best to access the connector from the bottom (battery side), and not from the side as the picture shows. Remove rear camera.
    • Remove rear camera bracket.

    • Release connector, but take care not to damage the electronic components next to the connector. It is best to access the connector from the bottom (battery side), and not from the side as the picture shows.

    • Remove rear camera.

  5. Release connectors and screw. Release connectors and screw. Release connectors and screw.
    • Release connectors and screw.

  6. Remove motherboard. Remove motherboard. Remove motherboard.
    • Remove motherboard.

  7. Remove main flex. Remove main flex. Remove main flex.
    • Remove main flex.

Sophia

Member since: 03/25/2014

43,282 Reputation

62 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 19

All Time: 16,427