Introduction
このガイドに従って、Xperia Z3のLCD &デジタイザの交換が可能です。
What you need
-
-
バックカバーを加熱して、下の接着剤を緩めます。
-
iOpenerを使用する場合は、こちらの 使用ガイド を参照してください。
-
吸引ハンドルでバックカバーを持ち上げ、隙間にピックを入れてください。
-
ピックを慎重に端の周りに動かして、各側面にある接着剤を緩めます。
-
-
組立の際は、以下の手順を逆の順序で実行してください。
組立の際は、以下の手順を逆の順序で実行してください。
Cancel: I did not complete this guide.
37 other people completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
7 Comments
What website is best to obtain a genuine screen and back from?
The back cover won’t fall off Josua but I would definitely recommend new adhesive!
But only for the phone to be waterproof? Because mine is definitely not waterproof anymore.. So I think this wouldn’t make any difference.
Josua -
In our case the back cover just held semi tight to the phone assembly without new adhesive. It could happen that the back cover falls off, when you pull the phone out of your pocket or you drop it. New adhesive also protects your phone from dust which can cause overheating.