Introduction
This guide covers the Sony Xperia XZ Premium front camera removal. This process involves unscrewing two screws and removing part of the frame to reach the camera.
What you need
-
-
Place a heated iOpener on the back panel of the phone to melt the adhesive inside.
-
-
Tool used on this step:Plastic Cards$2.99
-
Slide a thin plastic card under the back panel and around the perimeter of the phone to remove the adhesive.
-
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Is it okay to use a hair dryer instead of iOpener?
091 03718 - Reply