Introduction

This will guide you in replacing the Media Board of a Sony Vaio VPCF 132FX

Tools

No tools required.

Parts

No parts required.

Remove all wires then flip the laptop
  • Remove all wires then flip the laptop

Add Comment

Remove the battery Remove the battery
  • Remove the battery

Add Comment

Remove the screws and flip it back.
  • Remove the screws and flip it back.

you need to remove also all the screws from the bottom sides in order to detach the panel!

Dimitrios Vamv - Reply

Lift the screen and slide your nail or any flat plastic to the side of the cover to unclip it. Slide from the sides towards the center. Slide from the sides towards the center.
  • Lift the screen and slide your nail or any flat plastic to the side of the cover to unclip it.

  • Slide from the sides towards the center.

Add Comment

Gently remove the wire of the Power Button.
  • Gently remove the wire of the Power Button.

Add Comment

Unlock the Lock. Unscrew the 3 Flat screws and remove the Media Board. You may skip this step if replacing the Power Button.
  • Unlock the Lock.

  • Unscrew the 3 Flat screws and remove the Media Board.

  • You may skip this step if replacing the Power Button.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

trickster

Member since: 12/23/2013

1,602 Reputation

11 Guides authored

One Comment

What are the functions of the media board? My vaio vgn-fw170j won't power up (no LEDS on the power switch, or anywhere else, no fan, nothing). Verified that MoBo has 19.5 VDC on the board. Replaced MoBo and CPU, still no response. Since power button plugs into Media Board, figured it might be failed - any idea if this could be the cause?

course2kid - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 1,009