Fix Your Stuff Community Store

Sony RM-LVR1 LCD Screen Replacement

Introduction

This guide will teach you step by step how to replace your LCD screen.

What you need

  1. Sony RM-LVR1 LCD Screen Replacement, Battery: step 1, image 1 of 1

    • Use a Phillips #00 screwdriver to remove the four (4) screws on the back of the device.

    • If the screws strips or is previously stripped, refer to the stripped screw repair guide.

    Edit

  2. Sony RM-LVR1 LCD Screen Replacement: step 2, image 1 of 1

    • Battery is the rectangular and silver object in the center of device.

    • Remove battery with finger by prying at the rear.

    • If unable to remove battery, pry out using spudger.

    Edit

  3. Sony RM-LVR1 LCD Screen Replacement, LCD Screen: step 3, image 1 of 2 Sony RM-LVR1 LCD Screen Replacement, LCD Screen: step 3, image 2 of 2

    • Unscrew the 3 (three) screws holding the bracket in place.

    • Then remove the bracket by prying one end up.

    • Do not rip the ribbon cable connecting the bracket to the motherboard.

    Edit

  5. Sony RM-LVR1 LCD Screen Replacement: step 4, image 1 of 1

    • With tweezers, unplug the ribbon cable from the white connector.

    Edit

  6. Sony RM-LVR1 LCD Screen Replacement: step 5, image 1 of 1

    • Remove motherboard from the device by pulling upward gently, with fingers or tweezers.

    Edit

  7. Sony RM-LVR1 LCD Screen Replacement: step 6, image 1 of 1

    • Gently push out on these two clips holding the LCD to the motherboard

    • Once you have the first two off, ever so carefully, push the LCD towards the remaining two clips.

    • There is a ribbon cable underneath the LCD connecting it to the motherboard. Avoid sharp, sudden movements to prevent it from being damged

    Edit

    Salut, svp referance de l'LCD?

    be_vdp - Reply

  8. Sony RM-LVR1 LCD Screen Replacement: step 7, image 1 of 2 Sony RM-LVR1 LCD Screen Replacement: step 7, image 2 of 2

    • Undo the ribbon cable attached between the motherboard and screen by prying up black tab which holds the cable, using spudger. (See pictures)

    Edit

  9. Sony RM-LVR1 LCD Screen Replacement: step 8, image 1 of 1

    • Remove the screen from the motherboard.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

4 Comments

здорово!

подскажите где купить дисплей?, или его маркировку?. на дисплее ничего не написано, не могу найти.

Александр - Reply

Hi

I cant find an replacement lcd.

Could anybody help me where to get one?

Cheers

Sven

Sven van Bellen - Reply

any link to the replacement LCD please?

Bart Ptachowski - Reply

Hi .

search : HD 170 LCD Drift aliexp****

i think it will do the job .

cheers

ruigyl - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 482