Introduction

This is a guide to show you how to replace the cushions on the Sony MDR-XB450AP headphones. Replace these if you are experiencing discomfort and/or if there is visible wear and tear to the cushions themselves.

Parts

No parts required.

  1. Begin by laying the headphones down flat on a surface.
    • Begin by laying the headphones down flat on a surface.

    • Make sure that the headphone speakers are facing upward.

    • Be sure to check that the headphones are not plugged into any devices.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Using the plastic opening tools, gently pry the speaker from the headphone's base.
    • Using the plastic opening tools, gently pry the speaker from the headphone's base.

    • There will be some tearing involved, but this is necessary to remove the original cushion.

    • The cushion is bonded to the headphones with a circular adhesive strip. If you plan on reusing the cushion, try to keep the adhesive attached to the cushion during removal. This way the cushion can be easily re-attached to the headphones after repair.

    This sony MDR xb450ap is upgrade of mdr-xb450 headphone. If we compare this headphone with Sony MDR-XB650 https://www.vplak.com/sony-xb650bt-extra... it does not stand any where. The Sony MDR-xb650BT is primium headphone among all sony's headphone and earphone

    MAHESH KUMAR - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 17

Past 30 Days: 115

All Time: 1,921