Parts

No parts required.

Wash and dry your hands, then put on a properly grounded anti-static wrist strap, before handling internal electronic components. To ground the wrist strap, attach it to the metal chassis of a plugged-in three prong power supply, of a computer for example.
  • Wash and dry your hands, then put on a properly grounded anti-static wrist strap, before handling internal electronic components. To ground the wrist strap, attach it to the metal chassis of a plugged-in three prong power supply, of a computer for example.

  • Unfasten the hand strap.

  • Remove the battery.

Add Comment

Place device on left side with front lens facing right. Using a JIS size #00 precision Phillips screwdriver, unscrew the left middle 3mm Phillips screw.
  • Place device on left side with front lens facing right.

  • Using a JIS size #00 precision Phillips screwdriver, unscrew the left middle 3mm Phillips screw.

  • Open the "DC IN" plastic tab (Second 3mm Phillips screw is revealed).

  • Unscrew the second 3mm Phillips screw.

Add Comment

Turn device over onto its top with the front lens facing right.
  • Turn device over onto its top with the front lens facing right.

  • Unscrew the top left and top right 3mm Philips screws.

  • The right side case panel is now unfastened (the case panel facing up in the photo).

Add Comment

Remove the right side case panel by pulling up. The Hard Drive (HDD) is now revealed.
  • Remove the right side case panel by pulling up.

  • The Hard Drive (HDD) is now revealed.

Add Comment

Using your fingers, lift the HDD from it's right end, pivoting on it's left end. The HDD ribbon wire is now exposed. The HDD ribbon wire is now exposed.
  • Using your fingers, lift the HDD from it's right end, pivoting on it's left end.

  • The HDD ribbon wire is now exposed.

Add Comment

While securely holding the HDD in you left hand, use the soft pad of your right hand fingers to gently pull the ribbon wire out of its socket, toward your right. The HDD is now free from the device.
  • While securely holding the HDD in you left hand, use the soft pad of your right hand fingers to gently pull the ribbon wire out of its socket, toward your right.

  • The HDD is now free from the device.

  • Replace HDD,

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 142