Introduction

Need to clean the inside of the camera? Start by taking off the back cover.

Image 1/3: Image 2/3: Image 3/3:
  • Remove battery by sliding the tab to open the cover

Add Comment

Image 1/3: '''All screws in the camera can be removed with the PH 0 driver head.''' Image 2/3: '''All screws in the camera can be removed with the PH 0 driver head.''' Image 3/3: '''All screws in the camera can be removed with the PH 0 driver head.'''
  • Using the screwdriver, remove all screws (black 2.5mm) from outermost layer of the assembly.

  • All screws in the camera can be removed with the PH 0 driver head.

Split this step up into multiple steps based on where screws are being removed from or specify how many screws are removed in this step

alberto Rodriguez - Reply

Image 1/3: Remove the marked 1 mm screws with the screwdriver Image 2/3: Remove the marked 1 mm screws with the screwdriver Image 3/3: Remove the marked 1 mm screws with the screwdriver
  • Also using the screwdriver, remove screws (black 2.5mm) underneath articulated LCD screen.

  • Remove the marked 1 mm screws with the screwdriver

2 different types of screws are removed in this step: specify the types

alberto Rodriguez - Reply

Image 1/2: Do not pull too hard as you may break the plastic casing. Image 2/2: Do not pull too hard as you may break the plastic casing.
  • Using the plastic opening tools, carefully pry off the bottom plate.

  • Do not pull too hard as you may break the plastic casing.

Add Comment

Image 1/3: Once the back assembly is slightly detached, pull the media covers for the HDMI and Multimedia ports Image 2/3: Once the back assembly is slightly detached, pull the media covers for the HDMI and Multimedia ports Image 3/3: Once the back assembly is slightly detached, pull the media covers for the HDMI and Multimedia ports
  • Using the same plastic opening tools, separate the screen and back assembly from the front portion of the camera

  • Once the back assembly is slightly detached, pull the media covers for the HDMI and Multimedia ports

Add Comment

Image 1/2: Image 2/2:
  • Remove the back cover

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

KC Egger

Member since: 02/10/2017

222 Reputation

2 Guides authored

Team

Cal Poly, Team 21-1, Maness Winter 2017 Member of Cal Poly, Team 21-1, Maness Winter 2017

CPSU-MANESS-W17S21G1

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 11

Past 30 Days: 26

All Time: 125