Fix Your Stuff Community Store

Sony Cyber-shot DSC-W800 Button Board Replacement

Introduction

Some things to consider before you work on the Sony Cyber-shot DSC W800 to replace the Button Board:

  • The Button Board is an integral part of the device and any improper handling can cause issues in other parts of the camera.
  • Be cautious when removing ribbon wires.
  • Be sure to keep track of all pieces that are taken apart.

What you need

  1. Sony Cyber-shot DSC-W800 Button Board Replacement, Button Board: step 1, image 1 of 3 Sony Cyber-shot DSC-W800 Button Board Replacement, Button Board: step 1, image 2 of 3 Sony Cyber-shot DSC-W800 Button Board Replacement, Button Board: step 1, image 3 of 3

    • Remove the five 4.0 mm Phillips #000 screws on the back panel.

    Edit

  3. Sony Cyber-shot DSC-W800 Button Board Replacement: step 2, image 1 of 2 Sony Cyber-shot DSC-W800 Button Board Replacement: step 2, image 2 of 2

    • Using the Spudger, remove the back panel from the device.

    • The loose piece circled in the picture will most likely fall off the camera housing.

    Edit

  4. Sony Cyber-shot DSC-W800 Button Board Replacement: step 3, image 1 of 3 Sony Cyber-shot DSC-W800 Button Board Replacement: step 3, image 2 of 3 Sony Cyber-shot DSC-W800 Button Board Replacement: step 3, image 3 of 3

    • Remove the two 2.15mm Phillips #000 screws from the circuit board.

    • Gently pull on the ribbon wire from ZIF connector with the tweezers to remove the button board.

    • Ribbon wires can easily be damaged.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Author

with 4 other contributors

Thomas Campo

Member since: 02/09/16

788 Reputation

4 Guides authored

Badges: 16

+13 more badges

Team

USF Tampa, Team 17-5, Blackwell Winter 2016 Member of USF Tampa, Team 17-5, Blackwell Winter 2016

USFT-BLACKWELL-W16S17G5

5 Members

5 Guides authored

4 Comments

Thanks for this - was spot on and allowed me to easily fix the problem I was experiencing!

jimbradshaw - Reply

follow the step camera button loosen a bit unstuck but camera still stock on language setting and do not budge

Trisha Amable Girlfridayz - Reply

follow the step the button are unstuck but the camera display still stock on language setting

Trisha Amable Girlfridayz - Reply

i need a new strip, because old strip was damaged.

moonbhaai@gmail.com

Naveed Shoukat - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 26

All Time: 2,355