Introduction

Outline what you are going to teach someone how to do.

Image 1/1: To open the case, first gently remove the 2 screws at the bottom of the camera.
  • There are total 6 Phillip-head screws with the size of 2.93 mm on the outside of the camera.

  • To open the case, first gently remove the 2 screws at the bottom of the camera.

  • Make sure the battery compartment door is in lock position.

Add Comment

Image 1/1:
  • Turn the camera sideways, remove the two screws located on the left side of the camera.

Add Comment

Image 1/1:
  • Then remove the last two screws on the right side of the camera.

Add Comment

Image 1/1: Then gently lift the cover off.
  • To remove the front cover, use a plastic opening tool gently pry the top cover.

  • Then gently lift the cover off.

Add Comment

Image 1/1:
  • The front cover should now be detached from the camera.

Add Comment

Image 1/1: First use a plastic opening tool gently pry along the side of the camera.
  • To remove the back case cover from the body.

  • First use a plastic opening tool gently pry along the side of the camera.

  • Then slowly and gently lift the cover off.

Add Comment

Image 1/1:
  • The back cover should now be detached from the camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Zizheng Su

Member since: 01/21/2015

101 Reputation

1 Guide authored

Team

USF Tampa, Team 9-1, Brown Winter 2015 Member of USF Tampa, Team 9-1, Brown Winter 2015

USFT-BROWN-W15S9G1

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 219