Introduction

Disassembling the back cover of the camera so that we can repair components from the inside.

  1. Slide the battery cover in the direction the arrow points.
    • Slide the battery cover in the direction the arrow points.

    • Pull the battery cover towards you.

    Add Comment

  2. Flick the blue switch for the battery to pop out.
    • Flick the blue switch for the battery to pop out.

    • Remove the battery from the camera.

    Add Comment

    • Using the Phillips #00 Screwdriver, remove the two screws from the caution panel.

    • Remove that panel.

    • Careful for falling pieces.

    Add Comment

    • Remove the screw with a Phillips #00 Screwdriver from the right side of the camera (with '3x optical zoom' engraved on the side panel).

    • Remove that panel.

    Add Comment

    • Remove the screw using the Phillips #00 Screwdriver from the bottom the camera, closest to the back cover.

    Add Comment

    • Gently remove the back cover.

    • It may be a bit stiff, so use some force to remove it. Proceed with caution.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

kkfong91

Member since: 10/11/2010

293 Reputation

2 Guides authored

Team

Cal Poly, Team 9-20, Regan Fall 2010 Member of Cal Poly, Team 9-20, Regan Fall 2010

CPSU-REGAN-F10S9G20

5 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 3,249