Introduction

This guide will teach the user how to disassemble and access the AV port for replacement or installation.

The battery cover is located on the right side of the camera.
  • The battery cover is located on the right side of the camera.

  • Slide the cover to expose the battery.

Add Comment

Ensure that the battery lines up properly with the slot in the camera.
  • Ensure that the battery lines up properly with the slot in the camera.

  • Slide battery in.

  • Slide cover closed.

  • Battery not shown

Add Comment

This is the camera without the front cover.
  • This is the camera without the front cover.

Add Comment

Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.
  • Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.

Add Comment

Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.
  • Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.

Add Comment

Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side.
  • Pull apart the inner hardware from the back case by prying on the left side.

Add Comment

Remove the back cover.
  • Remove the back cover.

Add Comment

The back cover is now removed from the internal hardware.
  • The back cover is now removed from the internal hardware.

Add Comment

This is the CCD module.
  • This is the CCD module.

Add Comment

Use plastic opening tool pop open the two ribbons attaching to the CCD module.
  • Use plastic opening tool pop open the two ribbons attaching to the CCD module.

  • These are the two ribbons.

Add Comment

Remove CCD module.
  • Remove CCD module.

    • You may have to tug on the ribbons to remove the CCD module.

Add Comment

The CCD module is now removed from the camera.
  • The CCD module is now removed from the camera.

Add Comment

These two screws hold in the AV port. Use Phillips screwdriver to remove screws.
  • These two screws hold in the AV port.

  • Use Phillips screwdriver to remove screws.

Add Comment

Remove metal screw plate.
  • Remove metal screw plate.

Add Comment

Use pry stick to pop off ribbon.
  • Use pry stick to pop off ribbon.

Add Comment

Remove AV port from camera.
  • Remove AV port from camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Stephannie Allen

Member since: 03/11/2013

165 Reputation

10 Guides authored

Team

Clemson, Team 13-1, Benson Spring 2013 Member of Clemson, Team 13-1, Benson Spring 2013

CLEM-BENSON-S13S13G1

4 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 8

All Time: 322