Introduction

This is a step-by-step guide to disassembling and replacing the flash in the Sony Cyber-shot camera.

  1. First locate the appropriate screws for detachment.
    • First locate the appropriate screws for detachment.

    Add Comment

  2. Remove the five screws shown using a Phillips #00 Screwdriver.
    • Remove the five screws shown using a Phillips #00 Screwdriver.

    • It is important to put the small screws in a safe location in order to reassemble the casing.

    Add Comment

    • Using a spudger, carefully pry open the front casing.

    Add Comment

    • Carefully separate the front casing from the camera body.

    • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

    Add Comment

    • Using tweezers, gently pull the ribbon trace out of its housing found on the left side of the flash.

    Add Comment

    • Using a spudger, pry the small latch between the lens and the flash open to release the flash.

    • Pull the flash away from the camera.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Katie McCraw

Member since: 03/09/2012

191 Reputation

7 Guides authored

Team

Clemson, Team 1-5, Benson Spring 2012 Member of Clemson, Team 1-5, Benson Spring 2012

CLEM-BENSON-S12S1G5

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 13

All Time: 1,961