Image 1/2: Return the battery cover to its closed position. Image 2/2: Return the battery cover to its closed position.
  • Slide open the battery cover and remove the battery and the Memory Stick Duo.

  • Return the battery cover to its closed position.

Add Comment

Image 1/1:
  • Remove all three screws from the bottom of the camera.

Add Comment

Image 1/2: Image 2/2:
  • Remove the screws on the left and right sides of the camera.

Add Comment

Image 1/3: Remove both screws that hold the flash cover to the body of the camera. Image 2/3: Remove both screws that hold the flash cover to the body of the camera. Image 3/3: Remove both screws that hold the flash cover to the body of the camera.
  • Press down on the flash cover to raise the flash.

  • Remove both screws that hold the flash cover to the body of the camera.

Add Comment

Image 1/2: Slide open the battery port. Image 2/2: Slide open the battery port.
  • Place the camera upside down with the battery port positioned upward.

  • Slide open the battery port.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Pry the front cover of the camera off with the plastic opening tool.

Add Comment

Image 1/1:
  • Remove the power shutter unit

Add Comment

Image 1/2: Set the flash component aside. Image 2/2: Set the flash component aside.
  • Unscrew the screw located at the back left corner of the flash component.

  • Set the flash component aside.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Reuben Martinez

Member since: 02/23/2015

282 Reputation

2 Guides authored

Team

USF Tampa, Team 1-1, Leahy Winter 2015 Member of USF Tampa, Team 1-1, Leahy Winter 2015

USFT-LEAHY-W15S1G1

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 11

All Time: 568