Introduction

Use this guide if your radio is not working and the antenna needs to be replaced. This is an easy part to replace and requires a standard Phillips #1 screwdriver.

Parts

No parts required.

Image 1/3: Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole. Image 2/3: Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole. Image 3/3: Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole.
  • Unscrew the screw attaching the antenna to the boombox with a Phillips #1 screwdriver.

    • Once unscrewed, the antenna can be removed from the boombox by lifting it up and out of the hole.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Tess

Member since: 10/14/2014

398 Reputation

2 Guides authored

Team

Cal Poly, Team 10-38, Amido Fall 2014 Member of Cal Poly, Team 10-38, Amido Fall 2014

CPSU-AMIDO-F14S10G38

5 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 14

Past 30 Days: 68

All Time: 551